20140314 水下不分散混凝土力学性能试验研究_王迎飞.pdfVIP

2009 年 10 月 水运工程 Oct. 2009 第 10 期 总第 433 期 Port Waterway Engineering No. 10 Serial No. 433 水下不分散混凝土力学性能试验研究 * 王迎飞 1,2，王胜年 1,2，黄君哲 1,2，潘德强 1,2 （1. 中交四航工程研究院有限公司，广东 广州 510230； 2. 交通运输部水工构造物耐久性技术交通行业重点实验室，广东 广州 510230） 摘要：通过室外水槽模拟试验，研究浇注落差及水平扩散间距对不分散混凝土力学性能的影响，并与陆地成型混凝土进 行对比，采用钻芯法进行测试，并通过数理统计进行分析。试验结果表明：浇注落差不宜大于 0.75 m，两个浇注点的间距 不能大于 1.0 m，随着浇注落差的增加，不分散混凝土的物理力学性能及耐久性能呈非线性衰减趋势，不分散混凝土物理力 学性能与普通混凝土具有相同的变化规律。 关键词：不分散混凝土；浇注落差；扩散间距；力学性能 中图分类号：TU 528 文献标志码：A 文章编号：1002-4972（2009）10-0065-05 Experimental study on mechanical property of non-dispersible underwater concrete WANG Ying-fei1,2，WANG Sheng-nian1,2，HUANG Jun-zhe1,2，PAN De-qiang1,2 (1. China Communications Sihang Engineering Research Institute Co., Ltd., Guangzhou 510230, China; 2. Key Laboratory of Harbor and Marine Structure Durability Technology Ministry of Communications and Transport, Engineering Technology Research Co., Ltd. of CCCC Fourth Harbor Engineering Co., Ltd., Guangzhou 510230, China) Abstract: Based on the field simulation experiment, we study the influence of molding fall and level diffusion distance on the mechanical property of non-dispersible underwater concrete, which is compared with that of NUC molded on land, adopting drilled-core for test and analyzing based on regressive statistics. It is concluded through the experiment that the molding fall shall not be larger than 0.75 m, and the level diffusion distance shall not be larger than 1.0 m. With the increase of the molding fall, the physical and mechanical properties of non- dispersible underwater concrete decrease in a linear feature. Generally, The me