通力电梯1-8菜单选编.docVIP

通力电梯产品调试技能培训 --LCE菜单（1-5）/（7-8） 通力电梯有限公司培训中心(3/2003) 附件1- PAGE 2 培训教材 仅供参考 不得外传 通力电梯有限公司培训中心(5/2010) 1- PAGE 33 培训教材 仅供参考 不得外传 E 故障功能默认值最小值最大值数据描述　1故障历史***1=最近纪录按箭头健滚动故障纪录2清除故障历史*01设定1时清除故障纪录从E 菜单中清除故障纪录d 驱动故障　　　1 电梯参数功能默认值最小值最大值数据描述必需1主楼层1****楼层数选择主入口楼层, 对下集选非常重要, 因为所有的外呼都朝向主楼层.2控制模式2161=SBC，2=DC，3=FC，4=PB，5=MPB，6=FC带DIA外呼集选方式, SBC=单按钮集选, DC=下集选, FC=全集选, PB=按钮,MPB=记忆按钮有DIA.3液压电梯0070=没有，1=液压梯，2=防滑行，3=液压+液缸限位开关，4=防滑行+液缸限位开关 5=KCM831 Hydro with telescopic jacks 6=KCM831 Hydro with PPS 7=KCM831 Hydro with telescopic jacks + PPS　安全4PIN code in use0010=PIN code not in use 1=PIN code in useEnables or disables the PIN code features.5PIN Code Activated Features and Car Call PIN Code Locking (PCL) Setup00304UI Range 0 to 99 0=Setup of PCL and PIN codes accepted 1=Define floors of locked group 1 2=Define floors of locked group 2 ... 63=Define floors of locked group 63 UI Range 100s 1-00=Reset (clear) all locked groups 1-01=Reset (clear) locked group 1 1-02=Reset (clear) locked group 2 ... 1-63=Reset (clear) locked group 63 UI Range 200s 2-00=Set PIN code for Master group 2-01=Set PIN code for group 1 2-02=Set PIN code for group 2 ... 2-63=Set PIN code for group 63 UI Range 300s Set PIN code for PIN activated features: 3-01=PRC 3-02=OSS 3-03=OCL 3-04=OCV UI Range 0 to 99 Define the floors that are members of each PIN code locked group. UI Range 100s Clear the floors that were set via 1-5-1 to 1-5-63. Individual groups can be cleared, or all groups can be cleared at one time. UI Range 200s Program the PIN code for the locked groups that can be deactivated via a PIN code entry on the COP. Only available if menu item 1-4 = 1. UI Range 300s Program the PIN code for the features that can be activated/deactivated via a PIN code entry on the COP. Only available if menu item 1-4 = 1. Notes: 1) Elevator must be in RDF (machine room inspection) when this i