在labview中利用tcp协议进行简单点对点通信.docVIP

PAGE  PAGE 18 在labview中利用tcp协议进行简单点对点通信 篇一：基于LabVIEW的利用TCP协议进行双机通信 虚拟仪器课程设计 基于LabVIEW的利用TCP协议进行双机通信 学 院：电子与信息工程学院 班 级： 姓 名： 学 号： 指导教师： 利用TCP协议进行双机通信 摘要：LabVIEW（Laboratory Virtual Instrument Engineering Workbench）是当前最流行的图形化虚拟仪器集成开发环境，同时它也是一种功能强大的编程语言。与一般的编程语言（如VB，VC等）不同的是，LabVIEW采用基于流程图的图形化编程方式，因此也被成为G语言（Graphical Language）。LabVIEW首先提出了虚拟仪器（Virtual Instrument，简称VI）这一创新概念，这一概念将仪器技术与计算机技术紧密结合起来，将传统仪器由硬件实现的数据分析处理与显示功能，改由功能强大的PC机及显示器来完成，仪器功能完全由软件编程来实现，只要由I/O接口设备完成信号的采集、测量与调理，就能完成各种测试功能的计算机仪器系统。虚拟仪器概念的提出使得测量仪器的功能可以由用户根据需要自行设计软件来定义和扩展，而不是只能由厂家事先定义且固定不可变更。这样，用户不必购买多台不同功能的传统仪器，不必购买昂贵的集多种功能于一身的传统仪器，也不必不断购买新仪器。因为虚拟仪器可与计算机同步发展，与网络和其它周边设备互联，用户只需要改变软件就可以赋予它或扩展、增强它的测量功能。用LabVIEW开发虚拟仪器主要分两个部分：前面板的设计和框图程序的编写。前面板的功能等效于传统测试仪器的前面板；框图程序等效于传统测试仪器与前面板相联系的硬件电路。本文主要介绍怎样用LabVIEW完成局域网双机通信。 Abstract: the LabVIEW (Laboratory Virtual Instrument Engineering Workbench) is the most popular graphical virtual instrument integrated development environment, it is also a powerful programming language. With the general programming language (such as VB, VC etc.) is different, LabVIEW by flow chart based on graphical programming mode, so also known as the G language (Graphical Language). LabVIEW first proposed the virtual instrument (Virtual Instrument, referred to as VI) the definition of innovation, the concept of a combination of instrument technology and computer technology, the traditional instrument consists of hardware realization of data processing and display functions, PC and display by the powerful instrument to complete, fully functional by software programming, as long as the I\/O interface equipment acquisition, signal conditioning, computer instrument system can complete a variety of test function. Put forward the concept of virtual instrument makes the measuring instruments can be implemented by the user according to the needs of software designed to define and expansion, not only by the factory defined in advance and is fixed and can not be changed. In this way, the user does not