Microemulsion prepared iron oxide nano particles.docVIP

 PAGE \* MERGEFORMAT 16 Microemulsion prepared iron oxide nano particles [Abstract] Objective prepared by reverse microemulsion nanoparticles of iron oxide (Fe3O4). Methods triangular phase diagram to be determined cyclohexane, Triton X 100, n-butanol and water in 4-component system water-oil microemulsion, and the conductivity measurement system for the dye diffusion method to determine water in oil (W / O type microemulsion. use of the microemulsion of the “mini-pool” preparation of the nano-Fe3O4 black particles, optimizing the ratio of the volume of the reaction. through the infrared spectrum, scanning electron microscopy, elemental analysis of the prepared Fe3O4 nanoparticles were characterized. The results identified for microemulsion phase diagram Triangle area, get the optimal component ratio. When the reactant ratio of amount of substance n (Fe3 +): n (Fe2 +): n (OH-) = 3:2:24 be pure Fe3O4 when the black powder. Scanning electron micrographs of the experimental results show Fe3O4 particle size lt;100 nm. Conclusion The preparation of the positive is alkyl, Triton X 100, n-butanol, water microemulsion component system, prepared by the system of nano Fe3O4. [Keywords:] delayed-action preparations, emulsion agents, magnetic science, nanotechnology, drug carriers, iron oxide Fe3O4 nanoparticles as magnetic and has a good surface activity, Fe3O4 magnetic nanoparticles Preparation and properties of attention. Fe3O4 magnetic nanoparticles have a wide range of uses. In the biological, medical field, because the magnetic response of Fe3O4 magnetic nanoparticles, so that in cell separation, enzyme immobilization, immunoassay, and targeted cancer therapy, DNA separation and hybridization and so have the application [12]. Microemulsion is dispersed by the thermodynamic stability of two immiscible liquid phases consisting of macro-and micro-homogeneous liquid mixture on the uneven, often by a surfactant, cosurfactant (alcohol), oil (carbon hydrocarbons