基于单片机自动报警系统论文.docVIP

基于单片机自动报警系统论文 本科毕业论文 基于单片机自动报警系统 Microcontroller-based control and automatic fire alarm system 学 生 姓 名 XXXXX 专 业 XXXXXXXXXXXXX 学 号 XXXXXXX 指 导 老 师 XXXXXXXXXXXX 分 院 XXXXXXXXXXXX 201X年XX月 XXXXX学院毕业设计 摘 要 随着现代设备的安装应用，更多的自动报警系统被安装到各个领域。将单片机和传感器的有效联合应用可以发挥很好的报警效果。传感器是一种物理装置或生物器官，能够探测、感受外界的信号、物理条件（如光、热、湿度）或化学组成（如烟雾），并将探知的信息传递给其他装置或器官。然而，其应用的越广泛，对其精度和准确的要求就更迫切了。本文采用半导体烟雾传感器和MCS-51单片机，半导体传感器工作电压AC220V±15%，具有快速重复检测和延迟报警功能，可在一定范围内区别烟雾泄露和微量的散失，而且灵敏度高，稳定性好，抗干扰性好，具有一定的实用性价值。 关键词：烟雾 传感器 延迟报警 MCS-51单片机 单片机 XXXXX学院毕业设计 ABSTRACT With modern equipment installation applications, more automatic alarm system being installed in various fields. Will SCM and sensor effectively combined application can play a very good alarm effect. The sensor is a physical device or biological organs, would be able to detect, feeling outside signal, physical conditions (as light, heat and humidity) or chemical composition (such as smoke), and will discovery of information to other devices or organs. However, its application to the more widely, the accuracy and accurate request was more urgent. This paper adopts semiconductor smoke sensor and MCS - 51 SCM, semiconductor sensor working voltage, have fast AC220V + 15% repeated testing and delay alarm function, can within the scope of certain and difference between the smoke leak and trace lost, and high sensitivity, good stability and anti-jamming is good, have certain practical value. Keywords : Smoke Sensors Delay alarm MSC - 51SCM Microcontroller XXXXX学院毕业设计 目 录 绪 论 ................................................................ 1 第一章 烟雾报警器的方案设计 ............................................. 2 1.1 烟雾检测报警器设计思路 ........................................... 2 1.2 烟雾传感器的选择 ................................................. 2 1.2.1 烟雾传感器的基本概述 ....................................... 2 1.2.2 烟雾传感器的选定 .