MOLYVAN2000(OCD-225)-Holdingcompany.pptVIP

R. T. VANDERBILT CO.New Molybdenum AdditiveTechnology Tom Karol, Ph. D. Research Director New Molybdenum Additives MOLYVAN 2000 Molybdenum Dithiocarbamate MOLYVAN 855 Molybdate MOLYVAN 2000 Sulfurized Molybdenum Dithiocarbamate With improved Friction Retention OVERVIEW OF OBJECTIVESfor MOLYVAN 2000 Match or exceed competitive sulfurized MoDTC with regards to: a. Performance, and b. Physical/Chemical Characteristics Utilize a Modified C13 Molybdenum Dithiocarbamate US Patent 5,627,146  Competitor’s Patent where R1 = R2 and R3 = R4 but R1 does not = R3 R1 R2 R3 and R4 represent a C8 to C13 alkyl group having a branched chain and/or a straight chain MOLYVAN 2000 R = C13 alkyl groups MOLYVAN 2000 = S/Mo Mole Ratio 2.5 - 3.0 Competitive sulfurized MoDTC = S/Mo Ratio 2.6 OXIDATION METHODTest Procedure: Modified ISOT*(Indiana Stirring Oxidation Test) Test Conditions Temperature: 165.5°C Time: 48h Stirring Speed: 1300 rpm Catalyst: Copper and Steel *JIS K 2514 SRV Test Conditions Load: 50 Newtons Frequency: 50 Hertz Specimen: Ball on Disc Friction Run: 1 mm Temperature: 80°C Time: 30 minutes MOLYVAN 2000SRV TEST RESULTS Coefficient of Friction* Before ISOT After ISOT MOLYVAN 2000 0.08 0.08 MOLYVAN 822 0.09 0.11 Competitive MoDTC 0.09 0.09 *Determined on fully formulated oil containing 560 ppm phosphorus and 700 ppm molybdenum MOLYVAN 855 Organo Molybdate Ashless Friction Modifier OD-896B technology Molybdate Ester Formation 4 component system MOLYVAN 855 technology Iron Oxide to Iron Sulfide Fe Sulfide Coordination Molybdenum Thiadiazole Coordination * This presentation is designed to promote two molybdenum friction modifiers developed by our Research Division at R.T.VANDERBILT Company (RTV). Both products are particularly suited for GF-3 and GF-4 engine oil development. RTV is expanding production capacity for their manufacture. The two molybdenum friction modifiers are