ScopeofAccreditation109803-343,OutokumpuStainlessAb.docVIP

Metallic materials Changes in tables are bold Table 1 Corrosion Testing Methods name / title Standard Years Scope Strauss test ASTM A262, Method E 10 02a(08) EN ISO 3651-2 1998 Methods A, B and C Huey test ASTM A262, Method C 10 Including metallographic analysis of selective attacks 02a(08) EN ISO 3651-1 1998 Stamicarbon 53961 rev k, 2003 rev L, 2009 SNAMPROGETTI SPC.CR.UR.510 2003 UREA CASALE 8000-00-MSM-001 Rev A, 2006 SAIPEMSPC.CR.UR.529 2011 Engineering Standard8-A10A-95 Rev 0, 1995 Streicher test ASTM A262, Method B 10 02a(08) Pitting ASTM G48, Method A 11 Temperature range: 20-50°C Test duration: 24-74h  Table 2 Metallographic structure test Methods name / title Standard Years Scope Determination of intermetallic phases According to OS2506 Rev 1, 2012 Determination of particle size ASTM E112 10 Limited to the comparison method and Heyns cut-off method 96(04e2) Standard method for detecting intermetallic phases ASTM A923 08 Assessment of the amount of grain boundary carbides According to OS2505 Rev 1, 2012 Grain Boundary Assessment ASTM A262, Method A 10 02a(08) Assessment of slag inclusions ASTM E45, Method A and D 11 10e1 10 05e3 05e2 05e1 05 Determination of ferrite content with Fisher Ferritescope According to OS2507 Rev 1, 2012 Determination of phase emulsion with manual point counting ASTM E562 11 08 05(r08) 05 Table 3 Mechanical testing Methods name / title Standard Years Scope Tensile test at room temperature ASTM A370 Ch. 5-13 12 Force sensors: 2kN-600kN Strain gauges: 50mm-100mm 11 10 EN 10002-1 2001 ISO 6892-1 2009 Tensile testing at elevated temperature ASTM E21 09 Force sensors: 2kN-250kN Strain gauges: 50mm-60mm Temperature Range: 200°C-500°C 05 EN 10 002-5 1992 ISO 6892-2 2011 Determination of impact resistance ASTM A370 Ch. 19-28 12 Measuring range:10J-600J Temperature Range: -196°C, -50°C-20°C