SpecificationNumber16130-1-SchneiderElectric.docVIP

Specification Number: 26 05 33.10Product Name: WIREWAY SECTION 26 05 33.10WIREWAY PART 1 GENERAL 1.01 SECTION INCLUDES A. Wireway. 1.02 REFERENCES ANSI/NFPA 70 - National Electrical Code. National Electrical Contractors Association (NECA) Standard of Installation. NEMA WD 6 - Wiring Device Configurations. Underwriters Laboratories (UL) Standard of Safety 870 - Wireways, Auxiliary Gutters and Associated Fittings National Electrical Code (NEC) 362 - Wireways, 374 - Auxiliary Gutters 1.03 SUBMITTALS Product Data: Provide dimensions, knockout sizes and locations, materials, fabrication details, finishes, and accessories. Manufacturers Instructions: Indicate application conditions and limitations of use stipulated by Product testing agency specified under article 1.03 - References. Include instructions for storage, handling, protection, examination, preparation, and installation of Product. 1.04 QUALIFICATIONS Manufacturer: Company specializing in manufacturing Products specified in this Section with minimum five years of [documented] experience. Furnish Products listed and classified by UL, Inc. as suitable for purpose specified and shown. PART 2 PRODUCTS 2.01 MANUFACTURERS-WIREWAY A. Manufacturers: Square D Company LD SQUARE-Duct? NEMA 1 Square D Company LJ Oiltight Wireway NEMA 12 Square D Company LDR Raintight Wireway NEMA 3R Square D Company RD Raintight Trough NEMA 3R DESCRIPTION Description: [General purpose] [Oiltight and dusttight] [Raintight] type wireway. Knockouts: [Manufacturers standard] [None]. Size: [2-1/2 X 2-1/2 in (65 X 65mm)] [4 x 4 in (100 x 100 mm)] [6 x 6 in (150 x 150 mm] [8 x 8 in (205 x 205 mm)] [12 x 12 in (305 x 305 mm)]; length as indicated.****** [OR] ******Size: As indicated on drawings. Cover: [Hinged] [Screw] cover [with full gasketing.] Connector: [Slip-in] [Flanged]. Fittings: Lay-in type with [removable top, bottom, and side; captive screws] [drip shield]. Finish: [Electro-coated ANSI-49 Gray Epoxy Paint over Phosphate