年产600吨水性硅丙树脂车间工艺设计剖析.doc

设计总说明 随着科学技术的进步和人民生活水平的不断提高，涂料工业的发展已成为一个国家经济是否发达的标志之一。我国建筑涂料近年来得到了突飞猛进的发展，开始走上了多品种，中高档，从传统薄型向厚质，复层花纹的高装饰性过渡的发展道路，已初步形成具有一定规模，档次比较配套的工业体系。 有机硅改性丙烯酸酯树脂(硅丙树脂)兼有有机硅聚合物和聚丙烯酸酯之长，具有超耐侯性，耐磨耗性，并有优异的耐水性，耐有机溶剂性等特性；同时，随着聚合工艺的日益发展，水作为介质的乳液聚合受到了广泛重视，并且有替代溶液聚合的趋势，因此，利用乳液聚合来制备硅丙树脂，近年来一直是国内外科学工作者的研究热点．由于有机硅聚合物与其它聚合物相容性太差以及乳液聚合工艺上的不太成熟，从而进一步研究硅丙乳液共聚工艺，突破技术瓶颈，是一项极有价值的工作。 根据设计任务书，本设计进行了。的生产标准本设计的年生产总量为00吨。本设计采用了本设计中，车间厂房采用长方形双层厂房。厂房的尺寸(长×宽×高)为m×8m×10m。长方形厂房便于作全厂总平面布置，节约用地，方便设备排列，便于安排交通和出入口，有较多墙面提供给自然采光和通风设计使用。而液厂房高度要求较高，采用双层厂房利用率高，并且本设计留有空间便于扩大生产。 Illustration As the science and technology progress and peoples living level unceasing enhancement, the coating industry development has become a national symbol of whether the economy was developed. Our architectural coatings in recent years obtained the breakneck development, started on the many varieties, the middle-grade, from traditional to thick qualitative, light-weight clad transition of high decorative pattern development road, has initially formed a certain scale, grades, and compare matching industrial system. Organsilicone-modified acrylates resin (silicon a crylic-acid resin) with organic silicon polymer and poly (acrylic ester long, with super weatherability, resistance to wear, and have sex excellent water resistance, resistance to organic solvent such characteristics; At the same time, along with the development of polymerization processes, water as a medium emulsion polymerization is extensive attention, and the trend of an alternative solution polymerization, therefore, the use of emulsion polymerization, silicon a crylic-acid resin prepared at home and abroad in recent years, has been the hotspot. Scientific workers because of organic silicon polymer and other polymer emulsion polymerization process poor compatibility and the not too mature, thus further research silicon a crylic-acid emulsion copolymerization process, the breakthrough technology bottleneck, is a very valuable work. According to the design assignment,