GFS2命令行配置手则.docxVIP

GFS2命令行配置手册创建集群：首先通过ccs_tool工具创建集群：ccs_tool create NameofCluster通过ccs_tool工具创建fence设备：ccs_tooladdfenceNameofFenceAgentTypeofFence -C检查已经添加的fence设备：ccs_toollsfenceName Agentfence-sharedfence_manual通过ccs_tool工具创建集群中的节点：ccs_tooladdnodeNameofNode –v 1 –n 1 –f NameofFence -C检查已经添加的节点：ccs_toollsnodeCluster name: 001, config_version: 6Nodename Votes NodeidF 1 1 1 2 1 3 1 4 fence-shared在各个节点上同时启动集群服务：/etc/init.d/cman startStarting cluster: Loading modules... done Mounting configfs... done Starting ccsd... done Starting cman... done Starting daemons... done Starting fencing... done[ OK ]检查集群健康状态：clustat –i 3Cluster Status for 001 @ Thu Nov 19 13:26:55 2009Member Status: Quorate Member Name ID Status ------ ---- ---- ------ 1 Online, L 2 O 3 O 4 Online更新集群配置：ccs_tool update /etc/cluster/cluster.confConfig file updated from version 6 to 7Update complete.删除集群节点：ccs_tooldelnodeNameofNode删除集群fence设备：ccs_tooldelfenceNameofFence建立GFS（首先要连接iscsi设备，本文中由于iscsi使用的是专业存储，这里不介绍如何配置iscsi服务端了）安装iscsi客户端：yum install iscsi-initiator-utils发现网络上的iscsi设备：（如果以前挂载过别的iscsi设备，可以先将/var/lib/iscsi/nodes目录清空）/etc/init.d/iscsi restartiscsiadm -m discovery -t sendtargets -p 33:3260,1 .example:storage.disk2.sys1.xyz3:3260,1 .example:storage.disk2.sys1.xyz3:3260,1 .example:storage.disk2.sys1.xyz/etc/init.d/iscsi restartfdisk –lDisk /dev/cciss/c0d0: 293.5 GB, 293563949056 bytes255 heads, 63 sectors/track, 35690 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytesDevice Boot Start End Blocks Id System/dev/cciss/c0d0p1 * 1 22419 180080586 83 Linux/dev/cciss/c0d0p2 22420 35167