培训机构实训车间焊接烟尘处理装置的工艺改造 .pdfVIP

学兔兔 焊接现场 机械制造文摘——焊接分册 培训机构实训车间焊接烟尘处理装置的工艺改造 韩闰劳 ，林钢 ，杨丹 (1．庆阳职业技术学院，甘肃庆阳745000；2．酒钢集团兰州长虹焊接材料有限责任公司， 甘肃兰州730000；3．武汉大学动力与机械学院，湖北武汉430072) 摘要：焊接烟尘粒径小，粘性大，常规的烟尘处理系统易造成过滤板板结堵塞，有害气体进行净化处理不彻底，造成作业区 周围环境污染，影响附近人群身心健康。新型往复式高压水流冲刷式焊接烟尘收集处理系统正常排尘时通过水封装置将 过滤板下部封闭，使烟尘通过过滤板三次过滤排放，清洗时废水直接排入废水收集池沉淀，沉淀后的水可重复利用，解决 了焊接烟尘抽排过程中烟尘粘附于过滤网引起堵塞造成抽排除尘效果下降的难题。 关键词：焊接烟尘；收集处理装置；工艺改造 中图分类号：TG457．11 Process modification of welding fume in the workshop of welding training institution treatment device Han Runlao ，Lin Gang ，Yangdan (1．Qingyang Vocational Technical College，Qingyang 745000，China； 2．Lanzhou Changhong Welding Material Co．，Ltd．，Lanzhou 730000，China； 3．Wuhan University School of Power and Mechanical Engineering，Wuhan 430072，China) Abstract：Particle of welding fume iS small and viscous，conventional fume treatment system always lcads to clogging and compaction of filter plate，SO that harmful gas purification effect is reduced，causing environmental pollution and damaging health of people around the operating area．The new reciprocating high-pressure water flushing welding fume collection and treatment system closes the lower part of filter plate by water seal device SO as to discharge the harmful gas after filtering for three times，and the waste water flows directly into waste water collection tank for precipitation to be reused．The new welding fume treatment device solves the problem of blockage caused by dust adhering to the filter resulting in r