SDL端子拉力测试仪(国外英文资料).docVIP

SDL端子拉力测试仪(国外英文资料) Technical case Item: SDL terminal tensile tester Customer: (unit name) (unit address) (contact, phone, fax, E-mail) Jinan power equipment co., LTD Jinan power equipment co., LTD Date of the year Approval of audit SDL terminal tensile tester First, outline, SDL terminal tension tester is a testing device for the development and development of linear beam and electronic industry, which is used to test the pull force of various wire beam terminals. Configurable NK, HF pushing tension meter and special fixture, the instrument with a small device, control accuracy, high measurement precision, specimen clamping is convenient, simple operation etc., is an ideal equipment to harness manufacturers to ensure product quality. Two, characteristic, Horizontal installation. Manual operation, simple and stable operation. This machine can be installed on the desk (table) to make the frame more stable. Length x height: 450mm by 260mm by 160mm. Effective travel: 50mm. Rated load: 500N. (you can also configure 1000N) Net weight: 10.6 Kg. 3, appearance diagram, Technical indicators: Devices push pull meter: The general standard is configured as a digital display push pull (HF) -500. (it can also be configured with a pointer to push the nk-500, which is different). Digital display push pull meter Model: HF - 500. Maximum load: 500N (Kg, N and ib). Resolution: 0.01 N. Accuracy: plus or minus 0.5%. Output interface: RS 232?? Nine hole socket. Power supply: 220V/AC; Battery continuous working time: 6 ~ 8 hours. Stability: the temperature drift: 0.2 uV / ℃ (0 ~ 60 ℃). Zero drift: less than 0.1% over 8 hours/FS. Calibration range: full range calibration. Ambient temperature: 0 ~ + 60 ℃. Humidity: less than 80%. Allow overload: 150%. Power supply: nickel-cyanide battery / 220V AC charge for 4 ~ 6 hours. ? ? Pointer push tensiometer:? Model: NK - 500. Maximum load: 500N (50Kg). Push rod stroke: 10mm. Working temperature: 20 ℃ + 10 ℃. Transportation temperature: - 27 ℃ ~ + 7