2012岩土工程温习题2-谜底(国外英文资料).docVIP

2012岩土工程复习题2-答案(国外英文资料) Geotechnical engineering (2) Full score: 150 points 1, the judgment (1 point, 30 points; in the brackets, the correct square root, the wrong x). The standard of drying of rock water ratio test, according to the present domestic and foreign regulations, have time control and weigh control two kinds. (square root) The ratio of the water coefficient of rock to water is the ratio of the natural water absorption rate to the full water coefficient. (x) The density of the rock is the ratio of the mass of the rock to the volume. (x) 4. Usually for the shape stability of the rock mass deformation test standard has the following three criteria: absolute change of deformation at a certain time values as the standard, the deformation at a certain time of the change value of relative standard, standard time as deformation stability. (square root) The conventional rock strength theory is based on the coulomb intensity criterion, the Mohr intensity criterion and the Griffith strength theory. (square root) The surface stress test method mainly includes surface stress relief and surface strain recovery. (square root) The laboratory soil test is divided into the physical test of soil, the mechanical test of soil and the chemical test of soil. (x) In the case of the rock strain observation, the strain gauge can cross the structural surface when the observatory is arranged. (x) The indoor geotechnical tests are divided into the physical test of soil, the mechanical test of soil and the chemical test of soil. (fx) In addition to the particle size distribution curve of earth, five of the various physical properties of the soil are independent. (x) The water rate of the viscous soil in the project is liquid limit, plastic limit and fixed limit. (x) Soil that is less than 0.3 is a compact soil. (x) The permeability coefficient of viscous soil is usually determined by water head method. (x) Compressive soil has a compression index of more than 0.4, and low compressi