SUSEHAORALCE安装双机软件.docVIP

安装双机软件 安装多路径RDAC 打RDAC的系统软件包（gcc，install-initrd和kernel-source） 下载rdac-linux.tar.gz 上传rdac安装包 解压 tar -zxvf rdac-linux.tar.gz cd 到解压的文件linux-rdac目录下 make (make clean 再 make) make install 修改/boot/grub/meun.lst文件，如下(红字是要添加的) # Modified by YaST2. Last modification on 19 08:12:47 UTC 2010 default 0 timeout 8 gfxmenu (hd0,0)/message ##YaST - activate ###Dont change this comment - YaST2 identifier: Original name: linux### title SUSE Linux Enterprise Server 10 SP2 root (hd0,0) kernel /vmlinuz-0-0.21-bigsmp root=/dev/disk/by-id/scsi-3600605b001aafef012d8ac3d1c4b2c82-part2 vga=0x314 resume=/dev/sda3 splash=silent showopts initrd /initrd-0-0.21-bigsmp ###Dont change this comment - YaST2 identifier: Original name: xen### title XEN root (hd0,0) kernel /xen-pae.gz module /vmlinuz-0-0.21-xenpae root=/dev/disk/by-id/scsi-3600605b001aafef012d8ac3d1c4b2c82-part2 vga=0x314 resume=/dev/sda3 splash=silent showopts module /initrd-0-0.21-xenpae ###Dont change this comment - YaST2 identifier: Original name: failsafe### title Failsafe -- SUSE Linux Enterprise Server 10 SP2 root (hd0,0) kernel /vmlinuz-0-0.21-bigsmp root=/dev/disk/by-id/scsi-3600605b001aafef012d8ac3d1c4b2c82-part2 vga=normal showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off 3 initrd /initrd-0-0.21-bigsmp title SUSE Linux Enterprise Server 10 SP2 MPP root (hd0,0) kernel /vmlinuz-0-0.21-bigsmp root=/dev/disk/by-id/scsi-3600605b001aafef012d8ac3d1c4b2c82-part2 vga=0x314 resume=/dev/sda3 splash=silent showopts initrd /mpp-0-0.21-bigsmp.img 重新启动服务器，开机选择SUSE Linux Enterprise Server 10 SP2 MPP启动项进入系统。 用lsmod查看 （多了下面的红字部门说明OK了） hw_random 21784 0 ext3 139528 2 jbd 75680 1 ext3 mppVhba 135536 0 edd 24644 0 fan 20868 0 thermal 29832 0 processor 47468 2 speedstep_centrino,thermal lpfc 288280 0 sc