ST DMX512 协议官方.pdf

UM0791 User manual Demonstration firmware for the DMX-512 communication protocol receiver based on the STM32F103Zx Introduction This document describes how to use the demonstration firmware for the DMX-512 communication protocol receiver. The USART (universal synchronous asynchronous receiver transmitter) module of the STM32F103Zx (ARM 32-bit Cortex™-M3) microcontroller unit receives the data from the DMX-512 controller via an RS-485 transceiver. This receiver is compatible with the latest DMX-512 protocol, and can also be used with any DMX-512 controller having a “NULL” start code. This document provides: ■ an overview of the complete solution. ■ a description and flowcharts of the STM32 demonstration firmware. ■ schematics and layouts. March 2010 Doc ID 16257 Rev 2 1/21 Contents UM0791 Contents 1 DMX-512 receiver format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1 Packet format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.2 Timing values for DMX-512-A receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 DMX-512 receiver . . . . . . . . . . . . . . . . . .