多孔调湿材料湿缓冲特性的实验研究.pdfVIP

学兔兔 第37卷第5期 土木 建 筑与 环 境 工程 Journal of Civil。Architectural Environmental Engineering Vo1．37 No．5 2015年10月 0ct．2O15 doi：10．11835／j．issn．1674—4764．2015．05．019 多孔调湿材料湿缓冲特性的实验研究 刘奕彪，秦孟昊 (南京大学 建筑与城市规划学院，南京 210093) 摘 要：利用NORDTEST实验方法对q-国长江q-下游地区(以南京为例)多孔调湿材料的湿缓冲 值(Moisture Buffer Value)进行测定，同时，研究湿缓冲值对建筑能耗及室内湿度的影响。实验结 果显示，高湿度区间内材料的湿缓冲测定值较大，且不同材料的湿缓冲值存在较大差异。分析表明 在长江中下游地区，使用具有吸放湿特性的建筑内表面材料可有效降低建筑能耗1O 以上，同时， 室内环境湿度也会得到一定程度的调节。 关键词：多孔调湿材料；湿缓冲值；湿缓冲值测定实验；建筑能耗 中图分类号：TUI1]．19 文献标志码：A 文章编号：1674—4764(2015)05—0129—06 Experimental analysis of the Moisture Buffering Properties of Different Porous Hygroscopic Materials Liu Yibiao ，QinMenghao (School of Architecture and Urban Planning，Nanjinguniversity，Nanjing 210093，P．R．China) Abstract：A series of experimental tests using NORDTEST method for evaluating the moisture buffering capacity of different porous hygroscopic materials have been carried out in the Yangtse River downstream area(Nanj ing for example)，．The impact of MBV on building energy consumption and indoor humidity has also been investigated．The test results show that the MBV of porous hygroscopic materials is larger under higher humidity range，and there was obvious difference when using diverse materials．Research indicates that it may be possible to reduce up to 10 cooling energy consumption in the Yangtse River downstream area(hot and humid climate)in China，when applying hygroscopic materials with well—controlled HVAC systems．Meanwhile the indoor humidity can also be modulated to a certain extent． Key words：porous hygroscopic mat