告白喷绘尺寸请求(国外英文资料).docVIP

广告喷绘尺寸要求(国外英文资料) Some simple requirements for the production and output images in painting and writing. Size: The size of the drawing image is the same size as the actual request. It is different from the print and does not need to set aside the bleeding part. In a painting company, there is always a white edge after the output image, and the general condition is a 10CM edge of the net image. As you can see, you can agree with the print-output company to save as much as you want. The price is calculated per square meter, so the picture size is measured in centimeters. Image resolution requirements: The picture that is painted often is very big, should understand deep in lushan is not know the true face of lushan. The same is true of the painted picture, and if the big picture is still printed in resolution, it will kill the computer. But the part print image filter and no standard requires that the following is my personal use different size of resolution, you can refer to: infinite image area (m2), 180-30-180 1 -- 30 resolution (dpi) 11.25 22.5 45 Explanation: because the current drawing machine is more than 11.25 DPI, 22.5 DPI, 45DPI, which is the output of the output, it is reasonable to use image resolution to speed up the diagram. Pictorial usually require 72 dpi/inch is ok, if the image with large (such as a new image according to the actual size in PHOTOSHOP file size more than 400 m), can lower the appropriate resolution, can be controlled within 400 m. 3, image pattern requirements: The use of the CMKY model for the use of the spray painting forbids the use of RGB mode. Now print machine are four color printing, the color and printing color different, of course when doing the figure according to the standard of printing, print the company will adjust the color and small kind close to the picture. You can actually use the CMKY schema, or you can use the RGB schema. Note that the value of red in RGB is defined in CMKY, that is, M = 100, Y = 100. Image black