粗拙度符号标注n(国外英文资料).docVIP

粗糙度符号标注n(国外英文资料) In technical drawings, due to the wide, on which the label font size is different, in order to in use process can be more easily to determine the scaling value of surface roughness symbols match along with the font size, surface roughness symbols will draw in size 1 x 1 square. (1) the surface roughness symbol is drawn in the square of a square of 1 by 1, according to the roughness of the surface roughness and its dimensions, as shown in figure 1. Figure 1 draws the surface roughness symbol (2) in the drop-down menu, click draw a block, define the property, and open the define attribute dialog. (3) in the region of the property in the tag, prompt, value of all the columns, respectively, to fill in the corresponding column surface roughness value, roughness, 12.5, etc; In the text options area height bar, type 0.25 (this option can also be used in the drop-down menu format, writing style, font height set in the). (4) select adjust for the positive drop-down box in the text option area. (5) click the button to be sure, with the following tips: Command: _attdef Specify the first endpoint of the text baseline: Specify the second endpoint of the text baseline: Figure 2 is an interval of 1 and 2, which is based on specific situation. Figure 2 draws the surface roughness symbol definition property (6) enter write block command - wblock, open block definition dialog, and enter a surface roughness. (7) click the button select the object, with the following prompt: Command: _wblock (8) click the button pick up point and select the insert point of the surface roughness symbol (choose 1 point to insert point). Figure 3 selects the insertion point for the surface roughness symbol (9) click the confirm button to complete the surface roughness symbol. See figure 4. Figure 4 finishes the surface roughness symbol 5 annotations roughness: indicate the process of the surface roughness is inserted into the process of the surface roughness symbol figure block, the figu