《轮工工程基础》材料料题,三管轮(国外英文资料).docVIP

《轮工工程基础》材料料题,三管轮(国外英文资料) In the following metal materials, the material of brittleness is __B____. A. low carbon steel b. cast iron c. manganese steel d. copper In the following metal materials, the worst welders are ___D___. A. low carbon steel b. medium carbon steel c. high carbon steel d. cast iron In the case of an alloy, the following error is ___A___. The solubility of solute in A solid solution is limited The phase structure of the alloy cannot determine the performance of the alloy The solid solution is one of the basic phases of the alloy The group element of the alloy is usually the element The transformation of the lattice type does not occur in ___A___. A. recrystallized b. common c. crystallized d. austenitic to martensite The transformation of A (austenitic) into P (pearlite) is the _B_____. A. the transformation of c. cotectoid transformation Steel heat treatment is the process of changing the performance through heating, heat preservation and cooling. This time steel is in _B_____. A. liquid b. solid c. overcooled d. saturated Recrystallization annealing is an operation that takes the parts of ___C___ and heats them up to the temperature above the recrystallization temperature. A. heat treatment b. heat processing c. cold processing d. welding On the surface of the parts, the following is true __D____. Ⅰ, surface quenching Ⅱ enhances surface, surface quenching do not change the core organizations Ⅲ, parts surface layer of tempered martensite A. Ⅰ + Ⅱ b. Ⅱ + Ⅲ c. Ⅰ + Ⅲ d. Ⅰ + Ⅱ + Ⅲ It requires a certain amount of carbon in a certain range, such as low carbon content. The amount of carbon is too high. A. low/stiffness/low stiffness/low strength C. Low fatigue performance. Low hardness/low toughness The total amount of alloy elements in high alloy steel is __D____. A: its greater than 15% b. 8% c. 12% d. 10% In the following cast iron materials, mechanical performance is improved, and even close to steel is ___C___. A. produced cast iron b. malleable