下部结构计算书(国外英文资料).docVIP

下部结构计算书(国外英文资料) Second, the lower structure calculation Compile evidence General specification of highway bridge design (JTG d60-2004) Highway reinforced concrete and prestressed concrete bridge design specifications (JTG D62-2004) Highway bridge foundation and foundation design specification (JTG d63-2007) Highway masonry bridge design specification (JTG d61-2005) Highway brick and concrete bridge design specifications (JTJ 022-85) Highway design manual - platform and foundation Bridge tower and basic engineering 2. The upper reaction Pier no. load FZ (kN) Pier no. load FZ (kN) 0 Car (largest) 1296.2715 0 The constant load 1440.590801 one Car (largest) 1830.2055 one The constant load 5923.682789 2 Car (largest) 1830.20538 2 The constant load 5923.682789 3 Car (largest) 1296.2715 3 The constant load 1440.590801 Support for resistance Active support: F support = (1296.2715 + 1440) * 0.05 * 0.5 = 68.4 KN. Fixed support: F set = 5000 times 0.1 = 500 KN; For the safety consideration, the horizontal force of the top structure is passed to the abutment by the resistance of the supporting force. Bridge: H = 136.8 KN; The pier: H = 568.4 KN; (setting a fixed pedestal) 4. The abutment calculation The platform of platform 3 is 5.5 m, and the platform of platform 0 is 3.2 m, which is controlled by bridge 3. Detailed design drawings for detailed structural dimensions. 4.1 basic information Overall calculation parameter Type of bridge material C30 Bridge material weight (kN/m3) 24 Bridge volume (m3) 220.81 The abutment back (kN) 5299.39 Unit length (m) 2.75 Variable action information Auto level Highway grade I Number of lanes 2 The car causes the soil pressure loading method Vehicle load Braking force (kN) 136.8-136.8 Dynamical effect elevation (m) 263.775 (the top of the stone) 4.2 the body check 4.2.1 cross-section The section is 262.815 m, 5.5m from the bottom of the platform, the area of section is 14.45 m2 and the bending moment is 3.48 m4. 4.2.1.1 post-earth pressure calc