大体积溷凝土质量监理实施细则(国外英文资料).docVIP

大体积溷凝土质量监理实施细则(国外英文资料) The detailed rules for the quality supervision of the large concrete units of the central state branch One. Engineering overview and professional characteristics: (1) an overview of the project Chalco zhongzhou branch, the second line dressing bayer process project designed by the design institute of shenyang aluminum and magnesium, seed decomposition of 14 kinds of tank foundation, sit 756 7 on artificial dig-hole pile group on the stage, each group pile caps size (length) 31.9 m * (wide) 20.8 m * 1.8 m (high). The top elevation is -0.700 m and the base is -2.500 m. (2) professional engineering characteristics The smallest section of the group of seven sets is larger than 1m and is larger than 100M3, which is already large concrete. 2. In accordance with requirements of the mass concrete construction technology, construction organization design (scheme) explicitly take lower raw materials mixing of sand, stone, water temperature, each group of 14 root 50 mm steel pipe pile caps is set proper construction technical measures to strictly control the temperature difference value, in order to avoid temperature stress and crack. In order to effectively control the occurrence and development of harmful cracks, measures must be taken to control the hydration heat of concrete increases and the slow cooling rate, to reduce shrinkage of concrete, improve the ultimate tensile strength of concrete, should choose low hydration heat or in varieties of cement hydration heat, such as slag Portland cement. 3. According to the actual situation, this project USES the ordinary Po42.5 cement, cement by adding water reducing agent, to reduce the water cement ratio, reduce the hydration heat, to control the temperature cracks occur. 4. The project of concrete pouring can not in accordance with the general structure of cast-in-situ concrete pouring method, must develop the corresponding technical measures and construction scheme to ensure the concrete pouring and cur