冷 却 系 统 2(国外英文资料).doc

冷 却 系 统 2(国外英文资料) No title documents Chapter six is cold but system One. A. b. b. c. c. d. c. d. d. B 16. A Number two: Answer: 1. T 2. T 3. F 4 Three questions: 6-1. What is the function of the cooling system? A: the function of the engine cooling system is to cool the engine parts under high temperature conditions to ensure that the engine works at the optimum temperature. The cooling intensity of engine cooling system must be appropriate, insufficient cooling can make the engine overheating, excessive cooling will make the engine temperature is too low, the engine overheating or temperature is too low will affect their normal work. Currently, the normal working temperature (cooling water temperature) of the water-cooled engine widely applied in the car is usually 353 ~ 363 k (80 ~ 90 ℃). 6-2. How many types of cooling are there? A: according to the cooling medium, the cooling system can be divided into two types: water cooling and air cooling. What is the function of the 6-3 thermostat? Answer: the thermostat installed in the water jacket outlet, according to the engine operating temperature, it can automatically control the two cooling water to the radiator and water pump pathway, to adjust the intensity of cooling. The engine has a low working temperature (70 ℃ Below), the thermostat automatically closed to the access of the radiator, and open the pathway, to pump out water jacket cooling water through the hose into the pump directly, and the circulation pump into the water jacket again, due to the cooling water without radiator cooling, can make the engine work temperatures soared, the loop line called pulmonary circulation. Engine work temperature ( 80 ℃ Above), the thermostat automatically shut down the pathway, to pump and to open the radiator pathway, from the set of flow of cooling water through the radiator cooling water by the water pump into the water again after, improves the cooling intensity, in order to prevent the engine overheating, the loop lin