投影仪功课领导书(国外英文资料).docVIP

投影仪作业指导书(国外英文资料) The projector works instruction book File number: Development department: qc department Test categories Set the date version Page one Effective date Size measurement A nought. 1/2 The depth of the system is limited to the casting division 1. Purpose: To enable the operator to master the operation procedure of the instrument. Applicable scope: Suitable for the second dimensional image measuring instrument, device type: AP -4030. 3. Definition: slightly 4. Responsibilities: Operator: instrumentation and daily maintenance, instrument testing and management. Homework: 5.1 the instrument is introduced Inner ring lamp adjusts twist The outer ring light adjusts the twist The X axis control handle Y control handle Lift the handwheel switch The lens 5.2 software application 5.2.1 open the application software. 5.2.2 point function: this function is used to measure the coordinates of the measuring points, the function of the selected points in the measuring function, and find the required points on the workpiece, Then press the spacebar to see the points you take in the software, and see where the points are in the result column. 5.2.3 line function: this function is used to measure the length of line segment between two points, select line function within the measuring function and find the place on the workpiece For the first point, press the space bar and find the second point on the workpiece, press the space bar, and in the software When you see the line you take, you can see the starting point, end point, vertical, horizontal, and length of the line in the result column The display of the parameters. (note: the points can be changed to reach multiple points in the points column.) 5.2.4 point line-spacing feature: this feature is used to measure the distance between one point or one side to the other, and choose the line spacing within the measured function The function of finding the desired first point on one side of the artifact or at one point, then