校形)(国外英文资料).docVIP

校形)(国外英文资料) The school form is usually referred to as the shaping of the schools smooth space shape process. School form process is mostly in blanking, bending, deep drawing process after such as, in order to make the stamping parts for high precision flatness, radius size and shape, so it has very important significance in the stamping production, and is widely applied. The common features of the schools smooth process: (1) it is only in the parts of the process that it produces small plastic deformation to achieve the purpose of improving the shape and precision of the parts. (2) because of the high precision of the workpiece, the accuracy of the die is also higher. (3) the calibrating force should be applied to the working parts at the lower end of the machine, so the equipment is best for the fine press. When using mechanical pressure machine, the machine should have better rigidity and need to be equipped with overload protection device, in case the material thickness fluctuates and the equipment is damaged. Because the material is rough or due to the material in the process of blanking bending of arch (especially free surface material of progressive die blanking and oblique blade cutting), can make produce uneven blanking pieces defects, when required by the flatness of the parts, must add leveling process after cutting. There are usually three types of leveling: mold leveling, manual school, and level-leveling equipment. The flat mold of the flat parts of the plate has the form of smooth surface and the shape of the tooth form. Smooth surface mode is suitable for soft materials, thin materials or surfaces that do not allow for indentation. The internal stress state of the material is not very effective, and there is still a large rebound, especially in the case of high strength materials. In the production practice sometimes the process piece is back to back to the back of the back (bending direction), it can receive a certain effect. In order to keep the sc