浅析电力电缆施工及运转中受潮进水的主要启事及处理办法(国外英文资料).docVIP

浅析电力电缆施工及运行中受潮进水的主要原因及解决办法(国外英文资料) The main causes and solutions of the flood water in the construction and operation of shallow power cables [author: wg308308 | : my original | number: 470 | update time: 2009-3-28 | : wg308308] According to the overall planning, municipal construction in recent years in my company to undertake the construction of city network reconstruction, the high voltage cable has been gradually instead of overhead lines has been widely used. At present our company construction power cable is mainly used to YJLV22 series crosslinking aluminium core cable and YJV22 series crosslinking copper core cable (10 kv) is given priority to, compared with the overhead line and old oil filled cable, the cable insulation performance is good, allowing high working temperature (90 ℃), has good mechanical strength. The large application of cables, which both improve the reliability of the power supply and beautify the city, is worth promoting. But in the process of construction for a long time, a lot of feedback of running unit, we found that the cable be affected with damp be affected with damp this phenomenon more and more become the water potential hazards affecting the safe operation of the cable. The cause and harm of the flood in the cable (1) the orientation of the whole plate of cables in the factory, the two ends are sealed with plastic cover seal, but in the construction site according to the actual situation to go after a while, the remaining parts of the wound with a simple plastic fracture, because open at ordinary times put and sealing is not good, day a long, hard to avoid can have water vapor infiltration cable. (2) the cable laying, often need to cross the road, bridge and culvert, etc., due to weather or other reasons, in cable trench, also often have accumulated a lot of water in the installation process, inevitably there will be a cable head submerged in water, because of the plastic wrap is lax or damaged and make the water into the cable