管道试压与冲洗计划(国外英文资料).docVIP

管道试压与冲洗方案(国外英文资料) The main duties and responsibilities one On-site command one suk Coordination and command 2 Technical director one Long Bin Technical guidance 3 Comprehensive coordination one FuZhong huan coordinate 4 Director of security one Xu Liang Safety monitoring 5 Pressure testing personnel 4 Pressure testing, flushing, Safety measures and contingency plans 5.1 security measures The warning zone shall be set in the time of the trial pressure and the warning signs shall be set. No one shall be allowed to enter the scene. 5.1.2 before pressure testing must be conducted for homework personnel technical clarificaiton and safety technical disclosure, make clear tasks and technical requirements, the operator do have a clear division of responsibilities, organized, and education workers strictly implement safety operation procedures. All construction personnel entering site construction must wear safety helmet and seat belts on high places, and safety nets should be set when necessary. The construction site must set up a full-time security officer, and the class must have a part-time security officer who will resolutely correct the violations and avoid the occurrence of injuries and injuries. The scaffold built for construction must be strong, reliable and acceptable for use after acceptance. Before the test pressure of 5.1.6 pipe, it is necessary to check the fastness of the pipe bracket and the fastness of the pipe blocking plate, and the test pressure can be carried out before the problem is confirmed. The 5.1.7 water pressure test should be carefully checked to record the swelling and welding of the abnormal phenomena. 5.1.8 forbidden at the end of the pipe (such as: wall board, plug, etc.) standing opposite person, in case of running water cuts, when test pressure is not allowed to tighten bolts or lock nut. 5.1.9 when the pipe is pressurized, the pressure only slowly rises to prevent accidents. The test pressure must be in accordance with the rules of desig