修改海压、标准大气压、场压差别(国外英文资料).docVIP

修正海压、标准大气压、场压区别(国外英文资料) In 1993, a MD - 82 aircraft in the process of approach, because the pilot confuse height datum, possessing the correct the mistakes, cause the loss of the aircraft height is too low, touch the ground. In 1998, the air danger was approached by controllers using a highly basic error. ?? Atmospheric pressure (QFE) fixed sea level pressure (QNH) and QNE One, preface: Two, height measurement and noun definition: Height measurement and noun definition Determining the vertical position of the aircraft in space requires two elements: the measured datum and the vertical distance from the datum to the aircraft. In flight, the aircraft corresponds to a different datum, and the corresponding vertical position has a specific name. A Height is a vertical distance from a particular datum to a plane, a point, or an object that can be considered a point. Altitude refers to the vertical distance of an object from an average sea level to a plane, a point, or a point. Flight Level refers to the pressure surface of the pressure surface, which is based on the pressure surface of 1013.2 When using a barometric altimeter, you must use the scene pressure as a positive value. When the height is expressed, the correction of sea level pressure must be used as a high level value. When it comes to the altitude of flight, the standard atmospheric pressure must be used as the high meter dial positive. · scene pressure (QFE) : the pressure of the highest point in the landing area of an aircraft. Correction of sea level pressure (QNH) : the pressure of the observed atmospheric pressure, which is corrected to the atmospheric pressure of the average sea level. · atmospheric pressure (QNE) : the pressure of sea level under standard atmospheric conditions. Its value is 1013.2 hundred pa (or 760 mm mercury column or 29.92 inch mercury column). ? field pressure height (field height) : refers to the vertical distance of the highest point of the landing area, which is zero, and incr