删除旧网卡的配信赖息消除以前的ip(国外英文资料).docVIP

删除旧网卡的配置信息清除以前的ip(国外英文资料) Start - run - enter regedit into the registry. - find: HKEY_LOCAL_MACHINE \ SYSTEM \ ControlSet00 \ Services \ Tcpip \ Parameters \ Interfaces, several of the child and, to the old card type and TCP/IP Settings, delete the item is the same IP address can be set to the new card. The network card was replaced by a slot into the system, and a network card Realtek RTL8139 was used in the device manager. When I surf the Internet on a LAN, I set up my IP address for the network card, and I am not allowed to set it. How do you delete old network card Realtek RTL8139 Family PCI Fast Ethernet NIC? 在windows2000中，利用”控制面板”中的添加/删除硬件”选项删除原有的网卡。启动”添加/删除硬件向导”，依次选择”卸载/拔插硬 件-卸载设备”，钩选”显示隐藏设备”，可以找到原来的网卡，卸载即可。 在windows xp中，没有”卸载/拔插设备管理器”，而且”设备管理器”中的”查看”选项中虽有”显示隐藏设备”选项，但并不会显示己经拔除的旧网卡。 方法一：”命令提示符下”显示隐藏设备 打开在windows xp的命令提示符，输入”set devmgr_show_nonpresent_devices=1”后回车，接着输入”start devmgmt.msc”，打开设备管理器，选择”查看”菜单中的”显示隐藏设备”，展开”网络适配器”，我们就会看到原有的网卡，卸载即可，从而释放原 来与它捆绑在一起的IP地址。 方法二：修改”环境变量” 打开系统属性窗口，选择”高级”选项，点击下方的”环境变量”。在当前用户变量或“系统变量”中，点击“新建”按钮，在“变量名”一栏中输入 “Devmgr_show_Nonpresent_Devices”，“变量值”一栏中输入“1”。最后，点击“确 定”按钮，关闭桌面窗口，重新打开“系统属性”中的“设备管理器”，选中“显示隐藏设备”，就可以随时查看真正隐藏的设备了。 这种方法也可以通过修改注册表来实现。 打开注册表编辑窗口，依次展开“HKEY-LOCAL-MACHINE\\System\\ ControlSet001\\coontrol\\session manage”,在Environment键下新建”字符串值”，命名为”Devmgr_Show_Nonpresent_Devices”，双击此键， 将”数据数值”高定为”1”。关闭注册表，重新启动windows xp或重新登录，就能看到真正隐藏的设备了。 Solution 1: device manager - - shows hidden devices and removes old network CARDS Solution 2: Ipconfig/release Ipconfig/renew Save these two commands as bat files and double-click to run. Solution 3: (unverified)Modify the system environment variable and set up a devmgr_show_nonpresent_devices = 1 You can add it to the system properties, You can also type directly in the command line: Set devmgr_show_nonpresent_devices = 1 and then you can see the already removed network card in the device manager, and then delete the old network card * * * * * * * * * * * * * * * * * * * * * * * * * * *