- 1、本文档共8页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
11 (铜闸阀)Specification for Brass Stop Valves
6. SPECIFICATIONS
SPECIFICATION FOR BRASS STOP VALVES
1.0 General
1.1 Stop valves shall provide leak- free, tight closure (complete stop) of water
flow through the valve in the closed position.
1.2 It shall comprise of a body on which head, handle, spindle, gland, stuffing
box etc. with seals and washers mounted.
1.3 During operation washer plate stem assembly with the spindle is screwed
down causing the washer to shut on the seat against the water pressure.
1.4 All components shall be of “water works” standard and shall be of a well
proven robust design and manufacture.
1.5 The castings, forgings, and die castings shall be close grained, sound, smooth
and shall be carefully cleaned dressed.
1.6 All castings shall be free of blowholes other defects. No plugging will be
permitted in case of blowholes.
1.7 All non-metallic materials to be provided shall be listed in current “water
fittings and materials directory.”
1.8 If the washer plate is sand or shell casting, it shall be machined all over.
2.0 Specification
2.1 List of components
i. body
ii. spindle
iii. gland
iv. handle
v. stuffing box
vi. washer plate
vii. washer
viii. washer seat
ix. washer in gland
x. packing
xi. head
xii. head seal
NWSDB/SBD/SUP/Stop Valves/LC: Specifications
DPC: November 2009 – Version 1
6-1
2.2 Applicable Standards
The stop valves shall comply with BS 1010:Part 2:
文档评论(0)