BS-EN-10222.1-1998--压力用途用钢制锻件--第1部分：自由成型锻件的一般要求.pdfVIP

BRITISH STANDARD BS EN 10222-1:1998 Incorporating Amendment No. 1 Steel forgings for pressure purposes — Part 1: General requirements for open die forgings 压力用途用钢制锻件 第1部分：自由成型锻件的一般要求 The European Standard EN 10222-1:1998, with the incorporation of amendment A1:2002, has the status of a British Standard ICS 77.140.85 BS EN 10222-1:1998 National foreword This British Standard is the English language version of EN 10222-1:1998, including amendment A1:2002, published by the European Committee for Standardization (CEN). Together with EN 10222-2 to -4 it supersedes BS 1503:1989 which will be withdrawn when the four parts of EN 10222 are published. The UK participation in its preparation was entrusted by Technical Committee ISE/73, Steels for pressure purposes, to Subcommittee ISE/73/3, Steel forgings for pressure purposes, which has the responsibility to: — aid enquirers to understand the text; — present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; — monitor related international and European developments and promulgate them in the UK. A list of organizations represent