复合材料修复含腐蚀管道的变形量预测.pdfVIP

2016 年第 45 卷 石油矿场机械 第 9 期第 71 页 OIL FIELD EQUIPMENT 2016 ,45(9):71-74 文章编号:1001-3482(2016)09-0071-04 复合材料修复合腐蚀管道的变形量预测 徐时贤l ，段梦兰1 ，张玉l ，何同2 (1.中国石油大学(北京) ，北京 102249 ;2. 中国石油化工股份有限公司石油工程技术研究院，北京 100029) 摘要:采用复合材料修复管道的技术比其他传统修复技术更有优势，而且还能降低成本。因为复合 材料的变形量决定了修复管道的承载内压能力，因此计算了两种情况下的复合材料变形量.f!p. 羊 一腐蚀和两处腐蚀。建立带缺陷管道的三维模型，对腐蚀的深度、宽度和缺陷的距离进行研究。 130 个有限元模型通过 Python 语言进行了参数化建模。分析结果证明腐蚀长度对复合材料的变 形量影响比较大。而且，对于两处腐蚀的情况，当它们的轴向距离参数大于 2 时，由具有最大尺寸 缺陷的腐蚀决定复合材料变形量。 关键词:管道维修;复合材料;腐蚀;径向变形 中图分类号:TE973 文献标识码:A doi: 10. 3969/j. issn. 1001-3482. 2016. 09. 016 Prediction of Composite Deformation in Pipelines with Repaired Defects XU Shixianl ,DUAN Menglan l , ZHANG Yu l , HE Tong2 (1. China University οf Petroleum (Beijingl , Beijing 102249 , China; 2. Reseω rch lnstitute of Petroleum Engineering , 51 ;\lOPEC , Beijing 100029 , China) Abstract:Repairs made with composite patches on pipes offer distinct advantages over traditional repairs in addition to reduced cost. The object of this study was to calculate amount of deforma tions of composite in repaired pipelines under two conditions: single corrosion defect and two cor- rosion defects. The three-dimensional finite element model (FEM) was built. The effects of corro ded depth. length. width and distance of defects were investigated. Besides. 130 finite element models of thick-walled pipes with practical configurations were constructed and analyzed using Python (the programming language within the finite element software package ABAQUS). The obtained results indicated that the length of defect has a great influence on the deformation. In ad dition.