轻水反应堆RBI-Part 1.docVIP

CRTD-Vol. 20-2 基于风险的检测的导则制订 轻水反应堆(LWR)核电站部件 PREPARED BY The Research Task Force on Risk-Based Inspection Guidelines APPOTNTED BY The Codes and Standards Research Planning Committee of the ASME Center for Research and Technology Development For The ASME Council on Codes and Standards The United States Nuclear Regulatory Commission The National Board of Boiler and Pressure Vessel Inspectors The Pressure Vessel Research Committee - Welding Research Council American Nuclear Insurers The Hartford Steam Boiler Inspection and Insurance Company Industrial Risk Insurers The American Petroleum Institute The National Rural Electric Cooperative Association The United States Department of Energy Oil Insurance Limited Edison Electric Institute REVIEWED AND EDITED BY Steering Commit tee on Risk-Based Inspection Guidelines and an Independent Peer Review Committee NRC GRANT NO. NRC-04-89- 102 THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS United Engineering Center 345 East 47th Street Now York, N.Y. 100 17  DISCLAIMER This report was prepared as an account of work sponsored through the American Society of Mechanical Engineers (the Society) Center for Research and Technology Development by the United States Nuclear Regulatory Commission, the National Board of Boiler and Pressure Vessel Inspectors, the Pressure Vessel Research Committee - Welding Research Council, the American Nuclear Insurers, The Hartford Steam and Boiler- Inspection and Insurance Company, the Industrial Risk Insurers, the American Petroleum Institute, the National Rural Electric Cooperative association, The United States Department of Energy, Oil Insurance: Limited, and Edison Electric Institute (collectively referred to herein as the Sponsors). Neither the Society. nor the Sponsors, nor Westinghouse Electric Corporation, the University of Maryland, Rolls Royce and Associates Ltd., Battelle Pacific Northwest Laboratories, Failure Analysis Associates, Inc., Factory Mutual Research Corporation. Idaho National Engineer