Blackfin处理器与音频视频外围设备连接(2006年5月)intefacing_av_converters_transcript.pdfVIP

Blackfin Online Learning Development Presentation Title: Interfacing Blackfin® with Audio and Video Peripherals Presenter Name: David Katz Chapter 1: Introduction Chapter 2: Connecting To Audio Converters Chapter 3: Connecting To Video Converters Chapter 4: Digital Video Refresher Chapter 5: Blackfin Video Interface -- PPI Chapter 6: Connecting To Video Sources Chapter 7: Connecting To Video Displays Chapter 1: Introduction Hello my name is David Katz and I’m a member of the Blackfin Applications Team at Analog Devices. Today I’m going to talk with you about interfacing audio and video devices to Blackfin processors. My goal in this presentation is to familiarize you with the basic principles behind connecting Blackfin processors to audio and video devices. You don’t really need too much background knowledge for this presentation, but a basic working knowledge of audio and video would be helpful. I’ll try to provide some refreshers as I go along where appropriate. So I’ll start out in this module by talking about Blackfin audio video connectivity in a very broad sense, and then I’ll zone in a little more on audio converters, specifically on how Blackfin connects to those, what are the relevant peripherals, what are some examples of connections. We’ll look at some block diagrams, and what are some interfacing tips and tricks. And finally I’ll close the audio section by listing some collateral that you would find very useful in developing an audio system. Then over to the video side. I’ll do something very similar, first starting with a digital video refresher, but other than that proceeding along a very similar course. So here we have a basic AV system connectivity diagram. Obviously this is just an example but it shows the Blackfin’s view of the AV world. We have the processor in the middle and then depending on what we’re hooking up to, we have several different devices in between th