FPC连接器,0.5间距,1.0mm高。4-60PIN,下接触.pdfVIP

深圳市联泽瑞科技有限公司 1. SCOPE 1.1 Contents This specification covers the performance, tests and quality requirements for the FFC/FPC Connector. 1.2 Qualification When tests are performed on the subject product line, the procedures specified in LZR inspection plan and product drawings. 2. ORDERING INFORMATION PART NO.：FPC 05 10 01 XX L G 1 2 3 4 5 6 7 1 Series name FPC Connector 2 Pitch 0.5 mm 3 High 1.0mm 4 Mode 01:Clamshell FFC T=0.3mm / 02:Drawer FFC T=0.3mm 03:Clamshell FFC T=0.2mm / 04:Drawer FFC T=0.2mm 5 Number of terminals 04-50PIN L:Low Contact SMT Type / U:Upper Contact SMT Type 6 Assembly style D:Double-Face Contact SMT Type 7 Plating G:Gold flash over Nickel / T:Tin OVER Nickel 3. CONNECTOR DIMENSIONS See attached drawings. 4. MATERIAL Housing : Hight -Temp plastic Color : .White Flammability Rating (UL94V-0) Actuator Hight -Temp plastic Color : Brown. Flammability Rating (UL94V-0) Contact : Copper alloy Leg : Copper alloy Contact Plating See Ordering Information Leg Plating: Tin over Nickel