远程连接超越最大同意连接数的处理方法（国外英文资料）.docVIP

远程连接超出最大允许连接数的解决方法（国外英文资料）You can see that this is different, depending on the situation.Login ID 0 users is the local ID 1 and 12 is 3389 login ID, the former in the running, which has been disconnected, but disconnect still occupies system resources and channels, we need to kick it off. You can do the following.Input command: logoff 13, if the server is closed Telnet function (this is the default), also can be used to effectively expand the stored procedure, use the format: master the dbo. Effectively command content, the rest may refer to the second step. This approach requires access to the xp_cmdshell.Solution to the above basic did not use then I use the server terminal server beyond the maximum allowable number of connections, consider using cold start the server before, but it must be run on a computer room.The best and most convenient solution:In the run command line: MSTSC/console/v: your server IP: remote port