cad图线国标(国外英文资料).docVIP

cad图线国标 Mapping national standard and AutoCAD 2000 drawing initial environment setup summary: introduces the project design using AutoCAD 2000 The mapping national standards involved This paper compares GB/T 18229 with GB/T 14665, and gives the method to adjust the setting and function of the drawing parameters of AutoCAD 2000. Keywords: AutoCAD 2000; Engineering drawing; The national standard AutoCAD is a common CAD software developed by Autodesk in the United States. It has been a user of the software since the introduction of AutoCAD 1.0 in 1982 The number of people in the world has grown steadily It occupies the dominant position of microcomputer CAD software. AutoCAD 2002 is the latest version of the companys AutoCAD suite of software. AutoCAD software It has become many in our country The design institute, the research institute develops the platform of the support platform that the professional application software is preferred, and also gradually is incorporated into the engineering drawing teaching of Chinas higher engineering schools The reform plan and the syllabus In China, its learning and content are increasing year by year. However, AutoCAD is a general drawing system, and the design of system functions takes into account the requirements of various types of designs At the same time, the software adopted the British standard and ISO standards, This makes it necessary for our users to set up AutoCAD based on national standards and the characteristics of this type of drawing Make necessary, relevant changes and customization. This article introduces the relevant national standards and AutoCAD parts of AutoCAD Parameter Settings and function adjustments. Relevant regulations and contents of national standards Our country issued the national standard of the Peoples Republic of China in 1993-09-23. (GB/T 1465-93) was released in 1998 The mechanical engineering CAD drawing rules (GB/T 14665-1998) was replaced by GB/T 14665-93. These two criteria are in the