扬声器功率的标准(国外英文资料).docVIP

扬声器功率的标准 The power of the speaker is the most important indicator of the speaker. In audio engineering system design, decision between the speaker and amplifier work string matching, and speaker (speaker system) design process, such as dont have to know and understand clearly the work string value and meaning of the speaker. At present, different countries different manufacturers have the power values on the name of the loudspeaker of the loudspeaker, the meaning of the meaning lives in different, so the number is occupied in a large discrepancy. In recent years, our country has established the international (gb939396-88) of loudspeaker power, which basically adopts the method determined by the international electrotechnical committee (IEC). But some foreign brands, such as Americas JBL and EV, still use their own special standards. This paper will give a brief introduction to the national and international standards of loudspeaker power. In the past for a long time in our country every loudspeaker manufacturers of loudspeaker input power USES the power of standard of values, the provisions on the power harmonic distortion is in feeding the speaker standard test under constant voltage power, measured by the nonlinear distortion coefficient should not be more than the specified value of a given speaker. Because the standard power is determined by the size of the distortion value, distortion values and cannot exceed a certain requirement, so a smaller unit standard power are, is usually lower than in other types of power. It is no wonder that readers who have long exposure to standard power feel that domestic speakers are much lower than foreign speakers. In order to eliminate the different types of power of the speaker on the definition of chaos, the International Electrotechnical Commission (the International Electrotechnical themselves, abbreviation IEC) issued by the standard speaker electroacoustic device, puts forward the all present countries unanimously adopt