计算机网络实验指导-En.pdf

Computer Networks Lab Guide Edited by He Lijun Zhejiang University of Finance Economics Information School 目 录 Lab1 Unshielded Twisted Pair (UTP) Cable Construction 2 Lab2 Switching Basics 5 Lab2.1 Basic Operations of a Switch 6 Lab2.2 Basic Switch Configuration 20 Lab3 Router Basics 30 Lab4 Routing Basics 50 Lab4.1 IP Address 51 Lab4.2 Configuring static routes 68 Lab5 Dynamic Routing Configuration 79 1 Lab1 Unshielded Twisted Pair (UTP) Cable Construction Objective Be familiar with some common network cables Build a UTP Ethernet network cable Test the cable Equipments Category 5 UTP cables; RJ-45 connectors; RJ-45 crimping tools; Ethernet / RJ-45 continuity testers 2 Steps 1. The UTP cable is a four-pair, eight-wire, straight-through cable. 2. For a straight through cable, the color of wire on Pin 1 on one end of the cable will be the same as that of Pin 1 on the other end. Pin 2 will be the same as Pin 2, and so on. 3. Strip 5cm of jacket off of one end of the cable. 4. The cable will be wired to either TIA/EIA T568B or T568A standards. T568B is more common