便携式语音呼救器的设计学士学位论文.docVIP

毕业设计（论文） 题 目： 便携式语音呼救器的设计 学 院： 测试与光电工程学院 专业名称： 生物医学工程  便携式语音呼救器的设计 摘要：众所周知，当人们在家中遇到突发情况时，通过电话向急救中心（如）或其他的通信终端进行报警或求助已成为一种必然的选择。目前一般家用的电话基本可以满足普通用户在紧急情况下的使用要求，但对一些特定群体（如残疾人、有突发性疾病的患者等）并不适合。目前市场上报警器的种类繁多，但针对此类群体的便携式语音呼救系统就非常少见。本设计就是The Design of Portable Voice calling device Student name:Xie Yuanliu Class:080841 Supervisor:Yu Zulong Abstract:As is known to us all,when people meet urgent cases in the home, through the telephone to the emergency center (such as 110, 119, 120), or other communication terminal to call the police or ask for help has become an inevitable choice.We know the same ,at present general home phone basic can satisfy ordinary users in the use of an emergency request, but for some specific group (such as the disabled, sudden disease, etc) is not suitable.And on the market at present the alarm is variety, but for such groups of portable voice for help system is very rare. So,this design is a small try to solve such problem, combined with cost, application environment conditions for limits, design with the single chip processor as calling device portable speech.The product must meet the user can easily around the method of help inform people, immediately understand the parties to happen, and timely response requirements.Take it for a brief,the design of the portable speech calling device is just for this purpose, which can let us better solve once emergencies, which will reduce the damage to a minimum. This paper mainly recommends a system based on the brief of CPUs controlling about APR9600PY,which is for C coding and is based on STC89C52RC.For convenience , we pur the APR9600 voice chip into a recording module and prerecorded the useful voice signal.Then put the record chip to the design of the overall circuit to work.We make the chip up to a port,and control the working mode through the MCU program within its.We put the 1602LCD in SCM common external interface to