交换机管理配置综合技巧练习(国外英语资料).doc

交换机管理配置综合技巧练习 Review topic: switchboard management configuration comprehensive technique practice The serial number Grading rules score one Establish the console connection to the switch. (6) The console cable connects PC1 to S1 and establishes the console session. 2 Configure the hostname and VLAN 99. (20 points) Configure the switch host name as S1. (2 points) Configure port Fa0/1 and interface VLAN 99, assign VLAN 99 to the socket thernet 0/1, and set the mode to access mode. (15 points) Configure the default gateway, and S1 should be able to ping R1. (3) 3 Configure the history of the switch clock, set the console line, and the vty line. (6) The clock is configured for the current time, using the show clock command to verify that the clock has been set to the current time. (2 points) Set the history cache for the console line to 50. (2 points) Set the vty lines history cache to 50. (2 points) 4 Configure the switch password and console/Telnet access and configure the login slogan. (12 points) The l configuration privileges execute the password as class and execute the schema password as an encrypted form. (3) Set the console and the vty password to cisco and require the user to log in and encrypt the password. (6) The message slogan Authorized Access Only (restricted Access Only) is configured on S1. (3) 5 Configure the router. (21) The l configuration host is named R1. (1) Set the history of the console and vty to 50. (4) Configure the privileges to execute the encrypted form of the schema password and set the password to class. (4) Set the console and the vty password to cisco and require the user to log in through the password. (4) Encrypt the console and the vty password. (4) The day message is configured as Authorized Access Only (Authorized Access Only). (4) 6 Configure the startup sequence of the switch to resolve the mismatch between the duplex and the speed. (9) View the files stored in the current flash memory? Configure S1 to start with the second ima