LQ-1600K打印机罕见弊病的剖析与维修(国外英语资料).docVIP

LQ-1600K打印机常见故障的分析与维修(国外英语资料) Analysis and maintenance of common troubles in LQ-1600K printer Zhu Guosheng in Jiangsu 1995-07-07 - failure phenomenon: printer with electricity, but the machine initialization is correct, no paper and panel paper as light is not bright, according to feed back / paper button, printer paper unwinding operation. Exergy analysis and processing: from the failure phenomenon, control and drive circuit of printer is normal, the problem may be in paper detection circuit. Unplug the plug wire paper detector CN9, with a multimeter * 1 euro gear test, the paper found no matter detector machine has no paper, its resistance increases to infinity, visible paper detector has damaged machine powered CPU PA1 port is always high, CPU has been that the machine has paper. Therefore, the phenomenon of fault. Remove the paper detector switch and correct or replace a detector as soon as possible. The fault can be removed. - after power failure phenomenon: initialize correctly, but there is a paper printer, paper panel lights are lit. Exergy analysis and processing: from the analysis of the failure phenomenon, the reason is the pressure spring sheet detector paper in the machine can effectively control the detector, the contact is opened, so that the CPU PA1 port has not high level paper as fault display. The processing method is still the same example, remove or replace paper detector repair. In summary; due to the paper as detector is a mechanical switch, often due to import paper is not smooth, printing paper, printing head wrinkle return touch the paper, chain paper when the paper improper and the pressure lever spring detector switch when the deformation failure, this paper should disconnect the switch contact no paper, when the contact is connected, but the result is not to touch the paper paper pressure rod spring switch, the emergence of false fault papers without paper; when the detector contacts by dust, rust or contact deformation and contact fail