Protel 元器件封装查询(国外英语资料).docVIP

Protel 元器件封装查询(国外英语资料) Protel component packaging query Resistors: RES1, RES2, RES3, RES4; the package attribute is AXIAL series Non-polar capacitor: CAP; the package property is RAD-0.1 to RAD-0.4 Electrolytic capacitor: ELECTROI; the package property is RB.2/.4 to RB.5/1.0 Potentiometer: POT1, POT2; encapsulation property is VR-1 to VR-5 Diode: the package property is DIODE-0.4 (small power) DIODE-0.7 (high power) Triode: common packaging properties for TO-18 (ordinary triode), TO-22 (high-power transistor), TO-3 (high-power Darlington tube) The power regulator blocks have 78 and 79 series; the 78 series, such as 780578127820, etc. The 79 series has 790579127920 common packaging properties, such as TO126H and TO126V Rectifier bridge: BRIDGE1, BRIDGE2: package attributes for the D series (D-44, D-37, D-46) Resistance: AXIAL0.3-AXIAL0.7, where 0.3-0.7 refers to the length of resistance, usually AXIAL0.3 Ceramic capacitors: RAD0.1-RAD0.3. Where 0.1-0.3 refers to the size of the capacitor, usually RAD0.1 Electrolytic capacitor: RB.1/.2-RB.4/.8, where.1/.2-.4/.8 refers to the size of capacitors. General 100uF with RB.1/.2100uF-470uF, RB.2/.4, 470uF with RB.3/.6 Diode: DIODE0.4-DIODE0.7, in which 0.4-0.7 refers to diode length, generally used DIODE0.4 Light emitting diode: RB.1/.2 Integrated block: DIP8-DIP40, where 8-40 fingers have many feet, and 8 feet is DIP8 chip resistor 0603 indicates that the package size has nothing to do with the specific resistance, but the package size is related to power, usually as follows: 0201 1/20W 0402 1/16W 0603 1/10W 0805 1/8W 1206 1/4W What is the relation between the capacitance and the shape of the resistor and the package?: 0402=1.0mmx0.5mm 0603=1.6mmx0.8mm 0805=2.0mmx1.2mm 1206=3.2mmx1.6mm 1210=3.2mmx2.5mm 1812=4.5mmx3.2mm 2225=5.6mmx6.5mm Part Encapsulation refers to the appearance and the position of the solder joint when the actual part is soldered to the circuit board. Is a purely spatial concept, so different components ca