晶圆、芯片、IC、LED、TFT-LCD紧急呼吸系统设计施工规范(国外英语资料).doc

晶圆、芯片、IC、LED、TFT-LCD紧急呼吸系统设计施工规范(国外英语资料) This article is contributed by wuhusihaicai DOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Specifications for design and construction of emergency breathing systems for wafers, chips, IC, LED, and TFT-LCD Catalogue 1. general description 2. products and materials 3. construction 31. general description 1.1 general description 1.2 supply process operator using POU 2-3kg/c breathing sources, dew square meters, point 1.8cmm, oil free, 2-5 C, buffer tank 3 m3 compressed air system design, construction, inspection and testing of the general requirements. This chapter describes the general requirements for the design, construction, inspection and testing of compressed air systems for air traffic control. 1.3 scope of application: 1.3.1. air compressor and air tank, 1.3.2. compressed air pipeline and its special equipment, 1.3.3. refrigeration air dryer, 1.3.4. equipment base and shock proof installation 1.4 relevant regulations and standards The test method of 1.4.1. 1.4.2.ASTM B280 air compressor air conditioning and refrigeration field of SUS304 tube for 1.4.3.ANSI/ASME B1622 forging steel and steel alloy solder joint pressure fittings 1.5 quality assurance 1.5.1. Contractor provided product specification in this chapter shall be a professional manufacture of at least five years of production experience and have the same performance. 1.5.2. air quality acceptance standard: lSO8573-1CLASS1.4.1. 1.6 the Contractor shall submit documents for 1.6.1. equipment design data, including the manufacturer name, type, size, structure and performance. The performance curve, noise, vibration, material. 1.6.2. design data: check, calculate and select design data for compressor, air line calculation. 1.6.3. inspection of the manufacturers certificate to prove that the product meets or exceeds the specification requirements. 42. product 2.1.