电视机的故障判断(国外英语资料).doc

电视机的故障判断(国外英语资料) TV fault diagnosis, maintenance points and techniques (for beginners) A fault inspection method to check the fault quickly and accurately. The television receiver, must understand the system check order and flexible use of measuring instruments (such as multimeter, oscilloscope, voltage meter, etc.) is especially important for the use of multimeter. In order to check the fault of high preparation efficiency, is usually carried out in the following order: carefully pay attention to the change of image and sound, adjusting the knob, well confirmed by fault symptom image and sound show. A circuit or component that determines a fault. According to the program of fault diagnosis, follow the measuring instrument to check the position of the fault. Replace the faulty components, confirm their normal operation, and finally make sure that the operating range of the knobs is normal. 1, through the adjustment of each knob to confirm the fault symptoms and determine the fault circuit inspection procedure is to adjust each knob, carefully observe the fault symptoms, such as symptoms is not good, often determine the fault location errors occur. The circuit through the knob all can be judged: (1) channel switching and frequency tuning knob: can be used to check the high-frequency amplification and local oscillation circuit high frequency tuner section and field scanning circuit (using multivibrator appliances). Secondly, by rotating frequency tuning knob can judge the poor condition of image intermediate frequency amplifying circuit. (2) AGC adjustment knob: because the AGC voltage is added to the high frequency tuner and the image discharge circuit, they can be used to check their bad condition respectively. (3) contrast adjustment knob: used to check the video amplifier circuit (4) brightness adjustment knob: used to check the power circuit, picture tube circuit, high voltage power circuit and line output circuit. (5) field synchronous adjustment knob: an integ