医用气体管道系统的设计(国外英文资料).docVIP

医用气体管道系统的设计(国外英文资料) Design of the medical gas piping system East China architecture design research institute LTD Abstract: this paper introduces the design and attention of the medical gas center piping system project to improve the social and economic benefit of the hospital. Keywords: medical gas, central workstation, gas terminal. Abstract: The design of medical use of gas central Network engineering is introduced in this paper Issues should be paid attention on it to improve the social and The economical benefits of hospital. Summary: Medical gas pipeline supply system is an important and indispensable part of modern hospital, it includes medical oxygen system, pressure suction system, compressed air system, nitrous oxide (N2O), nitrogen and carbon dioxide and center workstation, etc. Through reasonable design of center of medical gas pipeline systems engineering, can make the hospital at a relatively low investment gain a powerful gas supply system, to ensure the hospital medical system run efficiently. The basic types and USES of medical gases The basic types of medical gases are medical oxygen, negative pressure, compressed air, nitrogen, gas (N2O) and carbon dioxide and other gases. Oxygen is mainly used for the general purpose of inhaling oxygen, critical patients oxygen inhalation (breathing machine) and the atomization of drugs. Negative pressure attracts mainly the use of phlegm, pus and blood; Compressed air is used for oral equipment and as a breathing engine (mixed gas); Nitrogen is the driving force of surgical tools; (N2O) is used as an anesthetic gas during surgery. Carbon dioxide gas is used to make bacteria in the abdominal cavity and in the laboratory. Setup of the medical gas piping system and the central workstation (source) Medical gas pipeline system is refers to the medical use of oxygen, pressure suction, compressed air, laughing gas, nitrogen, carbon dioxide and other gases supply, emissions and piping system. Set of medicinal gases area