局域网内电脑中网上邻居内打不开邻近计算机(国外英文资料).docVIP

局域网内电脑中网上邻居内打不开邻近计算机(国外英文资料) There is no nearby computer in the LAN Windows XP computers cant be accessed with computers installed on Windows 98, Windows XP computers and Windows XP computers cant communicate with each other. When workstation access servers, workstations in the neighbors online can see the name of the server, but cant see any share content after click, or tip cant find the network diameter, the right to access, summarized as the following: For the first time in XP, you need to create a new network connection for the network installation wizard in the properties of your online neighbors. Check the physical connection between computers. The network card is the basic device of the network connection, in the desktop computer, the indicator lamp behind each network card should be bright, which indicates that the connection is normal. If it is not bright, check the hub or switch is open, and the indicator lights on each client connection are bright, which means that the link is normal. Next, check whether the crystal head of the network line is in good contact. Ensure that TCP/IP is installed on all computers and is working properly. TCP/IP is installed by default in Windows XP. But if the network problem is to uninstall reinstall TCP/IP is not easy: in the local connection properties shown in this connection using the following list of items, click Internet protocol (TCP/IP), you will find the uninstall button is not available (disabled). This is because the transport control protocol/Internet protocol (TCP/IP) stack is the core component of Microsoft XP / 2003 and cannot be deleted. In this case, if you need to reinstall TCP/IP to restore the TCP/IP stack to the original state. You can reset the TCP/IP stack with the NetShell utility to restore it to the state of the initial installation operating system. Method is: after the command prompt, type the following command and then press ENTER: the netsh int IP reset c: \ resetlog TXT, among them, the resetl