异步电动机绕组损毁维修方法(国外英文资料).docVIP

异步电动机绕组损毁维修方法(国外英文资料) TXT likes me this is revolutionary demand, you know? ! Youre not going to fold your clothes and go! Ill fold it later! I must give you happiness, and no one wants to stop. By statistics, used in the production of three-phase asynchronous motor, failure of winding burn out electrical failure in operation by about 85%, about 15%, and other fault of winding burn out reasons for running lack of phase or overload operation, winding grounding and winding and white or interturn short circuit. Secondly, the reason of the mechanical aspects such as fixing, rotor friction, breakage and so on. In this paper, the reason of failure of the motor winding is analyzed, and the corresponding treatment method is put forward. The lack of phase operation Failure phenomenon The motor cant start up, and even if it can start up, the speed will rise slowly, and there will be a buzz. The motor was hot with smoke and burned. Check the results Remove the motor ends and see that the end of the winding is 1/3 or 2/3 of the polar phase winding or coking or dark brown. Causes and methods of failure (1) the fuse circuit of the motor circuit is damaged by contact or mechanical damage, causing a phase fuse to fuse. (2) the three phase fuse specifications of the motor power circuit are different, the fuse of small capacity is burned. The fuse should be changed to the same size according to the power of the motor. (3) the switch in the motor power circuit (the isolating switch, the cap switch, etc.) and the contact contact of the contactor (burn or loose). Repair and adjust the movement, the static contact head, make the contact good. (4) the line is missing. Find out the line and the connection is strong. (5) the false welding between the wires of the motor winding leads to bad contact. Check the connection wire of the motor winding and weld it. Two, overload operation Failure phenomenon The motor current exceeds the rating; The motor is above the rated temperature rise. Check t