数控铣床G代码和M代码(国外英文资料).docVIP

数控铣床G代码和M代码(国外英文资料) Best answer code G code Code name - function description G00 - - quickly locate G01 - - - - - - - - straight G02 - - clockwise interpolation in the clockwise direction G03 - - counterclockwise arc interpolation G04 -- - pause periodically G05 - - through the middle point arc interpolation G07 -- -z curve interpolation G08 -- -advance to speed G09 -- -- -- in a slow down The G20 - - subroutine calls G22 -- -radius size programming The G220 - - system interface is used G23 -- -diameter dimension programming G230 - - system operating interface G24 - - the subroutine is over The G25 -- -jump processing G26 -- -cycle processing G30 - - - the ratio is cancelled G31 - - the ratio definition G32 - - screw thread cutting, British G33 - - screw thread cutting, metric system G53, G500 - sets the artifact coordinates to log out G54 - - set the workpiece coordinate system one G55 - - set the artifact frame two G56 - - set frame three G57 - - sets the work frame four G58 - - set up the artifact frame five G59 - - set the artifact frame six G60 - - the exact path G64 -- -continuous path G70 -- -inch in inch G71 -- -metric measurement millimeter G74 -- -reference point (machine zero) G75 - - returns the zero of the programming coordinates G76 - - return to the starting point of the programming coordinate G81 - - the outer circle is fixed G331 -- -thread fixation cycle G90 - - the absolute size G91 -- -relative size G92 -- -prefabricated coordinates G94 -- -feed rate, feed every minute G95 -- -feed rate, per turn Function, G00 - rapid positioning Format: G00 X (U) __Z (W) __ Note: (1) this instruction enables the tool to move quickly to the designated location in the position of point control. No artifacts are allowed in the movement Carry on the processing. (2) all programming axes move at the same speed as defined by the parameter, when the value of the program stops, and the rest The axis keeps moving, (3) the coordinates of not moving are not programmed. (4)