联想激光打印机 二十四例故障检修实例!!(国外英文资料).docVIP

联想激光打印机 二十四例故障检修实例!!(国外英文资料) Lenovo laser printer in domestic laser printer industry in a leading position, the printing speed, quality and stability is very good, some performance can be compared with the foreign brand printers, even so have certain share in the market. Laser printers in use for a period of time after the failure is inevitable, so also for lenovo laser printers, below to lenovo series of laser printer introduce to the analysis and maintenance of common failures. The failure one, the printer cannot print Failure: the lenovo LJ2000P laser printer has no response or no printing after it is turned on. Failure analysis: possible cause of this failure has the following kinds: 1. The printer is not plug in, the printer power switch is not open, printer data cable connection is not correct; There is no paper in the carton. There is a card in the printer. Applications have problems or viruses; The hard disk space is too small for the printer to be unable to print or not to set the current printer to the default printer. The printer has been set to suspend printing. The printer driver is not appropriate and the configuration is incorrect; The printer port in the BIOS failed to open; The printer driver is not properly installed or damaged; The printer hardware failed. Troubleshooting methods: first, and check the connection of the cable of the printer power, found no problem, the next was carried out on the road in and out of the paper and the photosensitive drum and hard disk check, no problem, then use anti-virus software of antivirus treatment has no effect. Select start/set/printer, check the current printer icon with a black hook, indicating that the default printer has been set. Further checks are made to find that the drivers choice is incorrect. After selecting the correct drivers for lenovo LJ2000P in the application software, troubleshooting. Maintenance experience: when using a serial port to print, if the printer on the serial port of the switch p