装电脑的基本步骤(国外英文资料).docVIP

装电脑的基本步骤(国外英文资料) The basic step of installing a computer When assembling a computer, follow the steps below: (1) the machine box is installed, which is mainly to unpack the machine box and install the power supply in the cabinet. (2) the main board is installed on the main board. (3) the installation of the CPU, inserted the required CPU on the main plate processor socket, and installed the cooling fan. (4) the installation of the memory bar inserts the memory stick into the main board memory slot. (5) the installation of the video card, according to the card bus, select the appropriate slot. (6) sound card installation, now the market mainstream sound card is PCI slot sound card. (7) the installation of drives, mainly for hard drive, optical drive and floppy drive. (8) the connection between the chassis and the main board, the various indicators, the power switch line. The connection between the PC horn and the hard disk, optical drive, and the floppy disk and the data line. Cover (9) case (in theory in the installation after the host, is to cover the case, but in order to check out after, had better not to build, and cover system after the installation). (10) input device installation, connect keyboard mouse and host integration. (11) the installation of the output device, the installation of the monitor. (12) reexamine the various wiring and prepare for the test. (13) add electricity to the machine, and if the display is able to display correctly, the initial installation is correct, and the system initial setup is entered into the BIOS. In the above steps, the installation of general hardware is almost complete, but the following installation steps are required to make the computer run. (14) partition hard disk and format hard disk. (15) install operating systems such as Windows 98 or Windows XP. (16) when the operating system is installed, the driver, such as graphics card and sound card, is installed. (17) for a 72-hour toasting machine, if the hardware is def